INCREASE OF BOTTOM HOLE ZONE PERMEABILITY USING CHEMICAL REAGENTS

  • G. Doskazieva Atyrau University of Oil and Gas named after S. Utebayev
  • G. Imangaliyeva Atyrau University of Oil and Gas named after S. Utebayev
  • O. Tulegenova Atyrau University of Oil and Gas named after S. Utebayev
DOI: https://doi.org/10.31618/ESU.2413-9335.2020.6.79.1073
Keywords: hydrochloric acid, waterflooding, permeability, oil recovery, mud acid, terrigenous reservoirs, polyacrylamide, alkylated sulfuric acid, feed rate

Abstract

Substantiation of rational methods of application of polymer solutions, surfactants and other chemical reagents for increase of oil recovery is presented and technological calculation of injection into formation is performed

Author Biographies

G. Doskazieva , Atyrau University of Oil and Gas named after S. Utebayev

Candidate of technical sciences, Professor

G. Imangaliyeva , Atyrau University of Oil and Gas named after S. Utebayev

Candidate of technical sciences, Professor

O. Tulegenova , Atyrau University of Oil and Gas named after S. Utebayev

Candidate of technical sciences, Professor

References

1. Казакова Л.В., Южанинов П.М. Технология повышения нефтеотдачи пластов с использованием потокоотклоняющих химреагентов. Геология, геофизика и разработка нефтяных и газовых месторождений. №8, 2002 с.79-80
2. Магадова Л.А. Силин М.А.и др. Кислотная композиция «Химеко ТК – 2» для низкопроницаемых терригенных коллекторов // Нефтяное хозяйство, №5, 2003. С.80-81.
3. Ибрагимов Г.З.,Фазлутдинов К.С.,Хисамутдинов Н.И. Применение химических реагентов для интенсификации добычи нефти. М.: «НЕДРА» 1991.
Published
2020-11-20
How to Cite
Doskazieva , G., G. Imangaliyeva, and O. Tulegenova. 2020. “ INCREASE OF BOTTOM HOLE ZONE PERMEABILITY USING CHEMICAL REAGENTS ”. EurasianUnionScientists 6 (10(79), 22-25. https://doi.org/10.31618/ESU.2413-9335.2020.6.79.1073.
Issue
Vol. 6 No. 10(79) (2020): EURASIAN UNION OF SCIENTISTS №79
Section
Article

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.