CREATING A THREE-DIMENSIONAL MODEL USING LASER SCANNING
Abstract
3D laser scanning has progressed over the last half of the 20th century in an effort to accurately visualize the surface of various territories and objects. Over time, 3D laser scanning has become less complex and easily accessible, and it has become a popular technology for collecting data "as is". Technological advances in data quality, software processing, and ease of use are rapidly expanding the scope of 3D laser scanning. This article will cover the AVEVA E3D software used in 3D laser scanning.
References
2. AVEVAPlant. Основные принципы работы с 3D моделью // Учебное пособие, 2012 г. – С. 10-15.
3. Official website Of the Scandinavian company "ATS AB". LFM-Server // LFM Software Limited, an AVEVA Group company. URL: https://ats.se/pdf/lfm/LFM_Server_4.2_Datasheet.pdf
4. AVEVAPlant. Моделирование оборудования // Учебное пособие, 2012 г. – С. 23-30.
5. AVEVAPlant. Моделирование металлоконструкций // Учебное пособие, 2012 г. – С. 32-110.
6. AVEVAPlant. Моделирование трубопроводов // Учебное пособие, 2012 г. – С. 20-84.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.
