ФИЗИЧЕСКОЕ ОБОСНОВАНИЕ СТРУКТУРНЫХ УРОВНЕЙ ДЕФОРМАЦИИ ТВЕРДЫХ ТЕЛ

  • V. Shabunevich ВНИКТИ
  • A. Shabunevich
DOI: https://doi.org/10.31618/ESU.2413-9335.2020.7.80.1144
Keywords: finite element models, harmonic analysis, resonance peaks

Abstract

With the help of harmonic analysis of different-scale finite element models of cubic cells, a physical substantiation of the structural levels of deformation of solids is presented, which consists in the fact that with a decrease in the cells from the macroscopic to the mesostatic level of deformation, the number of resonance peaks of the deformation parameters in comparable scale frequency ranges decreases from seven or eight to two or three and further, during the transition to the microscale level, such a change is repeated again.

Author Biographies

V. Shabunevich , ВНИКТИ

Канд. техн. наук, вед. научн. сотрудник

A. Shabunevich

Инд. предприниматель

References

1. Архаров В.И. Мезоскопические явления в твердых телах и их мезоструктура // Проблемы современной физики. – М.: Наука.1980. С. 357-382.
2. Панин В.Е., Гриняев Ю.В., Елсукова Т.Ф., Иванчин А.Г. Структурные уровни деформации твердых тел // Изв. ВУЗов. Физика. 1982. № 6. С. 527.
3. Панин В.Е., Лихачев В.А., Гриняев Ю.В. Структурные уровни деформации твердых тел. – Новосибирск: Наука. 1985. – 229 с.
4. Шабуневич В.И. Масштабный эффект в динамике различных объектов. Примеры применения. LAP LAMBERT Academic Publishing. 2013. - 262с.
5. Шабуневич А.В., Шабуневич В.И. Физическое обоснование важности цифры семь // Евразийский союз ученых (ЕСУ). 2017. № 11(44). С. 80-90
Published
2020-12-14
How to Cite
Shabunevich , V., and A. Shabunevich. 2020. “ФИЗИЧЕСКОЕ ОБОСНОВАНИЕ СТРУКТУРНЫХ УРОВНЕЙ ДЕФОРМАЦИИ ТВЕРДЫХ ТЕЛ ”. EurasianUnionScientists 7 (11(80), 53-59. https://doi.org/10.31618/ESU.2413-9335.2020.7.80.1144.
Issue
Vol. 7 No. 11(80) (2020): EURASIAN UNION OF SCIENTISTS №80
Section
Article

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.