ABOUT THE POSSIBILITY OF APPLICATION OF ORD TECHNOLOGY IN MULTI-LAYER DEPOSITS IN THE DESIGN OF STAGE III DEVELOPMENT

  • G. Doskaziyeva
  • A. Saipedenov Atyrau University of Oil and Gas named after S. Utebaev
  • A. Omirbekova Atyrau branch of KMG Engineering LLP
DOI: https://doi.org/10.31618/ESU.2413-9335.2020.7.80.1134
Keywords: multi-layer field, simultaneous-separate injection, reservoir, waterflooding, reservoir pressure maintenance system

Abstract

This article discusses the possibilities of using the Simultaneous Separate Injection technology of the working agent in multi-layer fields in order to improve oil recovery, energy state of the reservoir and economic stability in the design of the third stage of the field development.

Author Biographies

G. Doskaziyeva

Candidate of technical sciences, professor

A. Saipedenov , Atyrau University of Oil and Gas named after S. Utebaev

undergraduate

References

1.Фондовый отчет «Анализ разработки месторождения...»;
2.Базив В.Ф., Закиров С.Н. Некоторые проблемы разработки многопластовых месторождений // Нефтяное хозяйство. — 2002. №11. - С. 58-60.
3.Мищенко И.Т. Скважинная добыча нефти: Учебное пособие для вузов. М.: ФГУП Изд-во «Нефть и газ» РГУ нефти и газа им. И.М. Губкина, 2003.-816 с.
4.Оборудование для раздельной эксплуатации многоплостовых нефтяных и газовых скважин. каталог, под ред. О.И. Эфендиева. - Баку/ЦИНТИХИМНЕФТЕМАШ. -1988. - 52с.
Published
2020-12-14
How to Cite
Doskaziyeva , G., A. Saipedenov, and A. Omirbekova. 2020. “ABOUT THE POSSIBILITY OF APPLICATION OF ORD TECHNOLOGY IN MULTI-LAYER DEPOSITS IN THE DESIGN OF STAGE III DEVELOPMENT ”. EurasianUnionScientists 7 (11(80), 20-26. https://doi.org/10.31618/ESU.2413-9335.2020.7.80.1134.
Issue
Vol. 7 No. 11(80) (2020): EURASIAN UNION OF SCIENTISTS №80
Section
Article

CC BY-ND

A work licensed in this way allows the following:

1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.

2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."

2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.